• product name: BZD131 LED Explosion Proof Lighting
  • Views : 177



Designed for Explosive Atmospheres Zone 1 and Zone 2.

Designed for Combustible Dust Zone 21 and Zone 22.

Designed for IIA, IIB and IIC Groups Explosive Atmospheres.

Designed for Temperature Classifications T1~T6.

Mainly Used for Indoor Work, Activities and Other Lighting Purposes.


Ordering References

The Light Fitting is with Lamp When Delivery, Can be Used While It is Powered.


Technical Parameters

Compliance with: GB3836.1, GB3836.2, GB12476.1, GB 12476.5, IEC 60079-0, IEC 60079-1, IEC 61241-0, IEC 61241-1;

Explosion Protection: Ex d IIC T6 Gb/Ex tD A21 IP66 T80℃;

Rated Voltage: AC220V 50/60Hz;

Lamp: LED;

Power: 20W;

Luminous Efficiency: >100 lm/W;

Power Factor: >0.95;

Color Temperature: 5200K~6200K

Color Rendering Index: Ra>75;

Ingress Protection: IP66;

Corrosion Resistance: WF2;

Cable Entry: G3/4";

Cable Outer Diameters: Ф9mm~Ф14mm;




Enclosure is Made of Aluminum Alloy Whose Content of Magnesium and Titanium is Less Than 7.5%, and Good Impact Resistance Can Withstand the Impact over 7J;

Flameproof Structure Design

The Transparent Covers are Made of Toughened Glass with Good Light Transmittance, and Impact Resistance Which Can Withstand the Impact of 4J;


LED Module

Integral Lamp Board with High Brightness Lamp Board is Supplied by AC220V Directly. Fewer Electronic Components Reduce the Incidence of Faults.

The Aluminum Base Board is Made of Aluminum Plate, Which is High Thermal Conductive Small Thermal Resistance and Fast Heat Conduction.

Special Designed Circuit Module is with Good Protection Function.

The Function of Luminous Flux Compensation Can Reduce Lumens Depreciation and Ensure the Luminous Efficiency of LED Lamp.

With the Protection Functions of over Voltage, over Current and Inrush Current;


Heat Dissipation

Enclosure is Die Casted of Aluminum Alloy with High Voltage Electrostatic Powder Coated Surface After Shot Blasting to Ensure Good Weather Resistance.

Conductive Silicon Wafer Between LED Aluminum Base Board and Aluminum Alloy Enclosure, Can Improve the Heat Transmission and Lower the Temperature of the LED Aluminum Base Board.

Numbers of Heat Dissipation Fins on the Enclosure Can Enlarge the Area of Enclosure and Effectively Dissipate Heat Through Air Flow, Which Controls LED Working Temperature in Optimum Range, Lower LED Light Failure and Extends the Service Life of the LED;



No Electromagnetism and Ultraviolet Radiation Provides Good Illumination to Users Who Work Indoor for a Long Time .

This Product is of Free Maintenance with Energy Conservation and Environmental Protection;

Cable or Steel Pipe Wiring.